There's a very powerful new Open Source (hardware and software) embedded development board out from the makers of the Beaglebone series of boards.
The Beagleboard X15
This new board's specs read more like a low end Intel NUC board's specs (ok.. maybe not). But the kicker is, the boards are open source, and there are ONE HUNDRED AND FIFTY SEVEN GPIO pins. These are broken out on 4 60 pin connectors along the bottom of the board. That is a ton of GPIO. For Comparison the Arduino has 16 GPIOs broken out, and the venerable Raspberry Pi has 26 GPIO pins.
Additionally it has eSATA and HDMI outputs.
And for once (!) they helped out case makers by placing the outputs mostly along two opposite sides of the board (instead of all around it randomly).
Backing up all these inputs and outputs are a 750-MHz C66x DSP and a Quad-core PRU and a Dual-core Cortex-M4. That's 7 independent cores (aside from the main OS processor) on 3 processors working on real time response to inputs or program logic.
I haven't even mentioned the 2 Gigabit RJ-45 Network ports, making it a handy stand alone router.
It runs Debian out of the box (from its embedded flash memory), peripherals can be hooked up via USB 3.0.
Unfortunately it will be over $1 per GPIO, the prices being mentioned are in the $200 range.
Making it as much as an HP Stream Mini, but that's a very different animal.
I hope to see these boards used in some projects to do some seriously heavy lifting.
Like for example running all the operations on just this board for a Pick and Place CNC machine with 4 axis movement and 3 cameras and multiple spool controls. Or a drone with all the automatic features and multiple cameras.
Showing posts with label cnc. Show all posts
Showing posts with label cnc. Show all posts
Wednesday, October 14, 2015
The New Beaglebone X15
Labels:
beagleboard,
beagleboard.org,
beaglebone,
board,
camera,
cnc,
Core,
Cortex,
Debian,
development,
DSP,
Dual,
eSATA,
gigabit,
GPIO,
hardware,
open source,
Pick and Place,
PRU,
X15
What's Next 10/13/2015
What's Next: A quick look into future technology news
Smallish CNC House Constructed from interlocking pieces
This is the Indigo Pine house by the Clemson University Solar Decathlon team.
They claim this house is made fully from cnc'd panels, with no fasteners needed.
As a resident on the southeast my question is, how does it hold up to a hurricane?
Sikorsky S-97 Raider
(Sorry I couldn't find a better pic (follow the above link for better ones though)
The newest military helicopter on the block has some pretty sweet capabilities (if they all pan out).
It can cruise at 250mph (with an even higher top speed) utilizing a rear ducted fan style rotor.
At the top are two counter rotating low drag solid rotors, that can be tilted independently to vector thrust in any direction giving pilots new maneuverability capabilities and a smoother than expected ride.
Smallish CNC House Constructed from interlocking pieces
This is the Indigo Pine house by the Clemson University Solar Decathlon team.
They claim this house is made fully from cnc'd panels, with no fasteners needed.
As a resident on the southeast my question is, how does it hold up to a hurricane?
Sikorsky S-97 Raider
(Sorry I couldn't find a better pic (follow the above link for better ones though)
The newest military helicopter on the block has some pretty sweet capabilities (if they all pan out).
It can cruise at 250mph (with an even higher top speed) utilizing a rear ducted fan style rotor.
At the top are two counter rotating low drag solid rotors, that can be tilted independently to vector thrust in any direction giving pilots new maneuverability capabilities and a smoother than expected ride.
Labels:
air,
aircraft,
Clemson,
cnc,
construction,
helicopter,
house,
Indigo,
interlocking,
military,
Pine,
Raider,
S-97,
Sikorsky,
Solar Decathlon
Wednesday, October 07, 2015
Tuesday Nights at Mobile Makerspace
Tuesday Nights at Mobile Makerspace:
We had a great night tonight. We had several visitors. We had woodworking, and 3d printing, and Laser engraving, and played with some computers, and worked on the tailgating table, and practiced on a metal lathe.
I should have taken more pictures.
David brought down his lathe and let us try it out. I will be using this little machine for my CNC project and possibly some other things.
David also used the scroll saw to cut some pieces for the +izzy swan Folding table. The (probably ancient) blade gave out on the last piece.
I worked on mounting the scrollsaw to the woodworking bench, it will be mounted on a swivel, but I've got to make sure it's very secure from vibrations.
Here's some pics:
We had a great night tonight. We had several visitors. We had woodworking, and 3d printing, and Laser engraving, and played with some computers, and worked on the tailgating table, and practiced on a metal lathe.
I should have taken more pictures.
David brought down his lathe and let us try it out. I will be using this little machine for my CNC project and possibly some other things.
David also used the scroll saw to cut some pieces for the +izzy swan Folding table. The (probably ancient) blade gave out on the last piece.
I worked on mounting the scrollsaw to the woodworking bench, it will be mounted on a swivel, but I've got to make sure it's very secure from vibrations.
Here's some pics:
Labels:
3d printing,
cnc,
engraving,
laser,
lathe,
makerspace,
metal,
Mobile Makerspace,
scroll saw,
swivel,
tailgating,
tuesday,
tuesday night,
woodworking,
woodworking cart
Tuesday, October 06, 2015
Simple CNC Spindle
At last, this simple CNC spindle I (speculatively) knew was possible.
It simply consists of 3 skate bearings, a collet holder (with an 8mm shaft) and one piece of machined metal.
The collet holder can be had for just $10, and I already have the bearings, just need some aluminum and (or brass) and a pulley.
Too bad the collets are Pricey $$$.
Links and Pics.. Here
It simply consists of 3 skate bearings, a collet holder (with an 8mm shaft) and one piece of machined metal.
The collet holder can be had for just $10, and I already have the bearings, just need some aluminum and (or brass) and a pulley.
Too bad the collets are Pricey $$$.
Links and Pics.. Here
Labels:
ball bearing,
bearing,
cnc,
collet,
pulley,
quiet,
skate bearing,
spindle
Monday, October 05, 2015
Monday, September 28, 2015
Random Instructables 9/30/15
Instructable of the Day:
2W Arduino Laser Engraver/Cutter
This is a super simple and cheap laser cutter/engraver.. it really could not be any simpler..
Raster images with 256 levels of grey .. nope
Autofocus or z axis.. nope
Higher power for metal.. nope
But you load materials and it will give you an image, I think it's pretty impressive for the time invested. Also it seems like a good starting point to add those other features as you go..
It's no GlowForge but it works good for what it is..
2W Arduino Laser Engraver/Cutter
This is a super simple and cheap laser cutter/engraver.. it really could not be any simpler..
Raster images with 256 levels of grey .. nope
Autofocus or z axis.. nope
Higher power for metal.. nope
But you load materials and it will give you an image, I think it's pretty impressive for the time invested. Also it seems like a good starting point to add those other features as you go..
It's no GlowForge but it works good for what it is..
Thursday, September 24, 2015
What's Next 9/24/2015
What's Next: A quick look into future technology news
Today we have great innovations and developments in ease of use in the small CNC industry.
Printrbot Releases the New Crawlbot:
This new CNC router from printrbot does not include a table! Instead you attach it to the plywood or sheet material you are cutting (or alternatively it is sized large enough to build a table bigger than a sheet). But at its core it's "the size of a golf bag", so it can easily be transported to a site or the material. As opposed to other full sheet machines, that need a crane to be delivered.
I've had my eye on printrbot since they first debuted, they seem like an exemplary company from what I've seen.
Image Credit; Makezine Review;
GlowForge Looks to Revolutionize Laser Cutting:
Using advanced sensors and software (why has no one done this yet?) and even more advanced software, the Glowforge laser cutter takes the user interface completely out of using a cutter. Just draw a design, the cameras inside record the design and convert it to laser motions. Then hit go, basically. There's no CAD, no drivers, no illustrations,
Additionally no privacy, but quick don't think about that (every design goes into "the cloud" for the magic image processing and other mysterious things).
It looks like an amazing machine, the bigger one with an included pass through, (use any length material as long as it's no wider than 20in) the machine tracks the material as its pulled through.
More: Here; Here; and Here.
Labels:
3d laser cutter,
CAD,
camera,
cloud,
cnc,
Crawlbot,
cutting,
Drivers,
glowforge,
illustrations,
image processing,
Industry,
laser,
Laser Cutter,
maker tools,
makers,
makezine,
Printrbot,
router
Tuesday, September 14, 2010
CNC Camera Scanner
Tormach has developed hardware/software to scan a part with high accuracy with your CNC milling machine..

Tormach is a company that makes on of the most prominent CAM software packages around, Mach3.
CAM stands for Computer Aided Manufacturing. The CAM software is what sends the commands to a CNC (Computer Numerical Control) machine.
Tormach has built a milling machine attachment and a software package. At the end of the attachment is a microscope USB camera.
The CNC machine (commanded by the CAM software (Mach3)) moves the camera around over a part that you want scanned. While commanding the camera to take a series of pictures which are then stitched together and entered into another plugin that helps you to draw that part in your CAD software with a large amount of accuracy. Build Log claims accuracy down to a few thousands.
This is reverse engineering and copying to the N-th level.

Tormach is a company that makes on of the most prominent CAM software packages around, Mach3.
CAM stands for Computer Aided Manufacturing. The CAM software is what sends the commands to a CNC (Computer Numerical Control) machine.
Tormach has built a milling machine attachment and a software package. At the end of the attachment is a microscope USB camera.
The CNC machine (commanded by the CAM software (Mach3)) moves the camera around over a part that you want scanned. While commanding the camera to take a series of pictures which are then stitched together and entered into another plugin that helps you to draw that part in your CAD software with a large amount of accuracy. Build Log claims accuracy down to a few thousands.
This is reverse engineering and copying to the N-th level.
Monday, September 13, 2010
A more refined ride
I previously posted about an industrial robot arm being repurposed to simulate motion and play video games
Well this time they wrapped a whole helicopter cockpit around the arm....
Well this time they wrapped a whole helicopter cockpit around the arm....
They are using this as a safe alternative to training new pilots. The arm provides 6 degrees of motion and allows a safe solo flight to be tried without risking a high dollar helicopter.
Labels:
cnc,
flight sim,
games,
helicopter,
motion simulation,
Robots
Subscribe to:
Posts (Atom)
















