Simple CNC Spindle

At last, this simple CNC spindle I (speculatively) knew was possible.

It simply consists of 3 skate bearings, a collet holder (with an 8mm shaft) and one piece of machined metal.

The collet holder can be had for just $10, and I already have the bearings, just need some aluminum and (or brass) and a pulley.

Too bad the collets are Pricey $$$.

Links and Pics..  Here

Simplified Mechanical System Part 1

I had an idea. 

I was talking to my brother and as I talked I was frustrated at how hard it was to build things. The biggest problem in my opinion is. Everytime I want to build something, it pretty much always involves some kind of shafts. 

Shafts have several functions: 

1. They hold components where they need to be.  But they also need to be held in place on the shaft.

2. Shafts give various components a common rotational axis. 

3. Shafts transmit motion from one component to another 

If you want to place a component on a shaft and have it perform reliably, it needs to be held in place on the shaft. If you want a component to spin smoothly, then you need a bearing placed on your shaft. The bearing needs to have the same inner diameter as the shaft's outer diameter, within a few thousandths, if not things will vibrate and wobble and all kinds of problems. Most shafts get stacked on with a different diameter for each component. Thats alot of custom machining. 

Borrow from: Wikipedia

I don't have the resources to machine custom shafts each time I have an idea, and I'm not alone in not having them.

Bearings are the next big problem. Some things need to free-spin on shafts and some things need to be engaged on the shaft. Again with each component needing a different inner and outer diameter. 

What's needed is a standard, a system. 

Kinda like the Arduino. Standard shields fit standard sockets with standard pinouts. It works for electronics, it works with Personal computers, PCI cards fit in PCI slots. Serial ATA drives plug into Serial ATA cables. Standards make building things (relatively) simple. (USB has got to be the best example Ever!) 

Then I realized. I've used skate bearings in several things. Skate bearings  are ubiquitous and standardized. Here you can get 100 for $35, $0.35 a piece! 

They have an exactly 8mm inner diameter and 22mm outer diameter, they are 7mm thick. But they don't come with any mounting help, no flange, no bearing block...

So an 8mm shaft will mesh up into a skate bearing exactly. 

Skate bearings are perfect for a simplified mechanical system...